Take Control of Your Viewing Experience: The Ultimate Guide to Programming Your Shaw Remote

Remote control programming can often be frustrating, but with the right instructions, it can be a straightforward process. In this article, we will provide a thorough guide on how to program your Shaw remote controls for a seamless viewing experience.

I. Programming the Shaw Champ Remote Control

The Shaw Champ Remote Control can only be programmed with your television set. Here’s how to program it:

1. Power on your television and press and hold the SETUP key until the LED blinks twice, then release.

2. Press the TV Power key and hold down the OK key.

3. Let go of the OK key when the TV turns off. This means that your setup is now complete.

4. If you need more help, you can find the Champ Remote Manual in the included link.

5. Additionally, there is a helpful video tutorial available for this process that includes a detailed explanation along with visual aids.

II. Programming the Shaw Champion Remote Control

The Shaw Champion Remote Control can be programmed with not only your television but all your devices. Here’s how:

1. Power on your TV and the device you would like to program with the remote (Blu-Ray, DVD player, etc.).

2. Press and hold the SETUP key until the LED blinks twice, then release.

3. Press the TV key or the device mode key to be programmed.

4. Press and hold the OK key.

5. Let go of the OK key when the TV turns off. This means that your setup is now complete.

6. If you would like more information on this remote, check out the Shaw Champion Remote Control Overview link.

III. Programming the Shaw Atlas Remote Control

Although no longer being distributed, the Shaw Atlas Remote Control is still used by some viewers. Here’s how to program it:

1. Power on the device you would like to program with the remote, such as your television or DVD player.

2. Locate the code for your device from the user's guide that came with your Shaw remote, or see the Atlas Remote Manual in the linked web page.

3. Press the mode key on the top of the remote, such as DVD or TV.

4. Press and hold down the SETUP button until the mode key flashes twice in a row.

5. Enter the code found in step one.

6. Press the POWER button on your remote to test your equipment

7. If your device powers off, your programming was a success.

8. If it does not power off, repeat steps 1-4 with the next code.

9. Lastly, there is a helpful video guide on how to program your Shaw Atlas Remote Control, which can be found on the linked web page.

IV. Programming the Shaw Transport Remote Control

The Shaw Transport Remote Control can only be programmed with your TV. Here’s how to program it:

1. Turn on your television set and locate the code for your television from the user’s guide that came with your Shaw remote, or from the Transport Remote Manual linked here.

2. Press and hold the SET button until the red light flashes twice, then release.

3. Enter the code for your television set found in step one. The red light will flash twice again to confirm the code.

4. Press the POWER button. If the TV powers off, the programming was successful.

5. If the TV has not powered off, repeat steps 2-4 with the next available code for your brand of television.

6. Lastly, please see the Shaw Transport Remote Control Overview link for more information.

In conclusion, programming your remote can be a breeze with these detailed instructions. We hope this guide has been helpful in enabling you to get the most out of your Shaw remote control.