Revolutionary Voice-Activated Remote for Rogers Ignite TV

Please follow the instructions provided below:

1. Begin by pairing your remote with the Set-Top-Box.

2. Ensure that the AA batteries are properly inserted into the remote. Make sure that both your TV and Rogers Set-Top-Box are turned on. Additionally, set the TV input to correspond with your Set-Top-Box.

3. Press and hold the ROGERS button, and patiently wait for the color of the remote light to change from red to green.

4. Next, input the three-digit code displayed on the TV screen. Press OK to successfully complete the pairing process.

5. Once your remote is successfully paired, refer to the on-screen instructions on your TV to configure control for both your TV and audio device.

TV, Rogers Set-Top-Box, and audio devices.

Your product supports a seamless and automatic setup process facilitated by QuickSet in your Set-Top-Box, which caters to most devices. To initiate the process, kindly refer to the instructions provided in our FAQ, titled: "How do I start using my remote (out of the box)?"

The Rogers Set-Top-Box will automatically detect your TV. In case the auto-detection fails, we have incorporated a CodeFinder tool powered by QuickSet to assist you in the setup process. Ensure that your TV is turned on, and proceed with the following steps to configure your remote. Please ensure that you point the remote towards your TV during setup.

1. Press and hold the SETUP button until the LED turns GREEN.

2. Utilizing the digit keys on your remote, enter the code provided in the CodeFinder tool accessible on this page.

3. Test the remote to verify that it effectively controls the Power and Volume functions of your TV. If it does not function as expected, please retry the setup process using the next code listed.

The Rogers Set-Top-Box will also automatically identify your audio system. If, for any reason, your audio system is not fully detected, don't worry. Our CodeFinder tool, powered by QuickSet, will assist you in the setup process. Simply turn on your audio device and follow the steps below to configure your remote. It is imperative that you point the remote towards your audio device during setup.

1. Press and hold the SETUP button until the LED turns GREEN.

2. Using the digit keys on your remote, enter the code displayed in the CodeFinder tool found on this page.

3. Test the remote to ensure that it correctly controls the volume functions of your audio device. If it does not perform as expected, attempt the setup process again using the next code listed.

Please refer to the provided instructions to pair your Remote for Voice Control. During the setup process, please ensure that you direct the remote towards your equipment.

1. Press and hold the SETUP button until the LED turns GREEN.

2. Press the ROGERS button.

3. Follow the on-screen instructions on your TV to enter the 3-digit code that is displayed.

4. Once successfully paired, you can utilize the VOICE CONTROL key while holding it down to activate voice commands.

Please note that this remote is initially configured to control the volume using your TV. If you wish to change the volume control to another device, please follow the steps below. Ensure that your audio device is turned on, and make sure to point the remote towards your audio device when conducting the setup.

1. Press and hold the SETUP button until the LED turns GREEN.

2. Using the digit keys on your remote, input the code provided in the CodeFinder tool found on this page.

3. Test the remote to confirm that it effectively controls the volume functions of your audio device. If it does not perform as expected, retry the setup process using the next code listed.

For optimal equipment control, please adhere to the following guidelines:

- Always point the remote directly at the equipment you wish to control, ensuring that there is a clear line of sight.

- The LED on the remote should blink with each keypress. If it fails to do so, it is advisable to replace the batteries.

- Prior to controlling your equipment, the remote needs to be programmed. Please follow the instructions in the setup section of this page for manual setup. Alternatively, you can access the on-screen settings on your TV, select Remote Settings, then proceed to Voice Remote Pairing, and follow the on-screen instructions to configure control for your TV or any other equipment.

Lastly, please double-check that the battery tab has been removed before proceeding.

Please ensure that your television is turned on. It is vital to pair the remote control with the television, ensuring that you have correctly entered the designated three-digit code during the pairing process.

Indeed, once the remote control is successfully paired with the television receiver, you gain access to a multitude of convenient features. These include the ability to browse through an extensive range of television listings and On Demand content, locating previously recorded shows, effortlessly switching channels, scheduling recordings, and much more, all with the simple command of your voice.

To achieve these functionalities, kindly refer to the subsequent set of instructions:

• Ensure that the remote control has been successfully paired with the television.
• While speaking, please remember to press and hold down the VOICE button.
• Once you have finished issuing your voice command, release the VOICE button to transmit the command.

It is worth noting that this particular remote control operates on AA-sized batteries. While Heavy Duty batteries are potentially suitable, we highly recommend the use of alkaline batteries due to their superior longevity.

You will be alerted to low battery levels by a series of five intermittent blinks. Should you observe this indication, it is advisable to replace the batteries promptly to ensure uninterrupted functionality.