Program Your Shaw Remote

To successfully reprogram your remote, follow these steps:

1. Simultaneously press and hold the MENU and OK buttons until the POWER button flashes twice. Then, release both buttons.

2. Input the code 9 - 9 - 3 - 1 (The power button will flash twice as confirmation).

For volume control through your audio system:

1. Press and hold the MENU and OK buttons until the POWER button flashes twice. Then, release both buttons.

2. Enter the code 9 - 9 - 3 - 3 (The power button will flash twice as confirmation).

For detailed information, refer to the comprehensive manual on using the Shaw Gateway remote.

To program the Shaw Champ Remote Control with your television, follow these instructions:

1. Hold down the SETUP key until the LED blinks twice, then release it.

2. Press the TV Power key.

3. Press and hold the OK key.

4. Release the OK key when the TV turns off. This indicates successful setup completion.

You can access the Champ Remote Manual for further guidance.

For a video tutorial on programming your Shaw "Champ" Remote, click the link provided. If you are unable to view the video, there is an alternative option to watch it on YouTube. Find an overview of the Champ remote for additional information.

To program your Champion remote with your television and other devices, perform the following steps:

1. Hold down the SETUP key until the LED blinks twice, then release it.

2. Press the TV key or the device mode key that you want to program.

3. Press and hold the OK key.

4. Release the OK key when the TV turns off. This signifies the completion of the setup process.

For more details, consult the overview of the Shaw Champion remote.

The distribution and production of the Shaw Atlas remote control have been terminated.

Follow these instructions to program your Shaw Atlas remote control.

To initiate the programming process for your Atlas/Backlit remote control, you must first turn on the device you wish to program with the remote (e.g., your television, audio system, Blu-Ray or DVD player). Once the device is powered on, proceed as follows:

- Find the code for your device in the user’s guide that was included with your Shaw remote, or refer to the Atlas Remote Manual.

- Press the mode key corresponding to the device you want to set up (e.g., VCR, DVD, AUD, or TV).

- Hold down the SETUP button on the remote until the mode key (VCR, DVD, AUD, or TV) flashes twice in succession.

- Enter the code obtained in step one.

- Press the POWER button on your remote to test your equipment. If the device turns off, the programming has been successful. Repeat steps 1-4 with the next code for your equipment if the device does not power off.

Master Power:

The Shaw Atlas remote can also be configured for master power, which allows the main power button to control the on/off power for all your equipment simultaneously, eliminating the need to manually select and power on/off each device individually.

To set up master power:

- Press and hold SETUP on the Shaw remote control until the mode key (CBL) flashes twice consecutively.

- Input 9 - 9 - 5 on the keypad.

- Press the Power button once.

- Press the mode key for the first device you want in the power sequence (e.g., CBL). Then, press Power once.

- Repeat step 4 to add the other devices you want included in the power sequence (e.g., AUD then power, TV then power).

- Press the mode key (CBL) once.

- Hold down the SETUP button until the CBL button blinks twice.

Locking Volume Controls to Audio Devices:

If you are using an audio system to control the volume while watching TV, it is possible to program your Shaw remote to lock the volume button so that it only operates with your stereo. To activate volume lock:

- Hold down the SETUP button until the mode key flashes twice consecutively.

- Enter the code 9 - 9 - 3.

- Press the mode key under which your audio system was programmed (AUD, AUX, etc.). This will lock the volume to that device.

Video Tutorial: How to program your Shaw "Atlas" Remote

Unable to view the video? Click here to watch it on YouTube.

Learn more: Overview of the Atlas remote.

To configure your Shaw Transport Remote for your TV, please follow these instructions:

1. Start by referring to the user's guide that came with your Shaw remote or the Transport Remote Manual to find the specific code for your TV. You can also obtain this information from the following link: [Transport Remote Manual](https://www.urcsupport.com/wp-content/uploads/2016/02/Transport-Eng-Fren.pdf).

2. Switch on your TV.

3. Press and hold the "SET" button until the red light flashes twice. Then release the button.

4. Enter the corresponding code for your TV, as determined in step 1. The red light will flash twice again to confirm the successful entry of the code.

5. Press the "POWER" button. If your TV turns off, that means you have successfully programmed your remote to work with your TV.

6. If your TV does not turn off, you will need to repeat steps 3-5 using the next available code for your TV brand.

For more information and a comprehensive overview of the Transport Remote, please visit the following link: [Overview of the Transport Remote](https://support.shaw.ca/t5/tv-articles/how-to-use-shaw-remote-controls/ta-p/6641#Transport).